XRC Triumph Tiger 900 Anti-Fatigue Handlebar Mount Kit 2019 to 2023

The XRC Triumph Tiger 900 Anti-Fatigue Handlebar Mount Kit, is designed to bring the base of the handlebar back 5mm, 11mm, 17mm, 25mm depending on which way you rotate the mounting blocks, it also lowers the bar height by about 10mm at the 25mm position giving you more power in your arms, if you are under 170cm tall you may find the handlebar reach slightly too long for personal preference, this is the case for me so I made a kit to bring the bars back 25mm allowing me to have my bars set in a more upright position without the long reach, the mounts do not raise the bars.

The XRC AF "Anti-Fatigue" Handlebar Dampening System is your best friend to stop numb fingers and sore arms. 

The XRC AF "Anti-Fatigue" Handlebar Dampening System also allows the bars to flex about 8mm -10mm at the end so when you hit a rock with your foot peg the bars won't shock your hands.

The AF system is supported by Urethane bushes designed to absorb engine and chassis vibrations. The system also dampens the forces acting on the handlebar in a horizontal and vertical direction, maintaining steering precision.

All Alloy components are full billet alloy, CNC machined and anodized offering very strong components with a very durable finish, cap screws and washers are zinc plated so wont rust. 

The factory brake and clutch cables work fine, all cabling is still relaxed

Whats in the box

• 1 x Pair of XRC AF Clamps
• 1 x Pair of Triumph Adaptors
• 2 x M10 Cap Screws
• 2 x M10 washers

Note this is for 2019 model to 2023 model

Torque settings for the top clamp cap screws
16 Nm - 20 Nm
12 lb-ft - 15 lb-ft

Check out all our bar mounts and dampers.

Please note for international transactions you will need to check for your local import taxes and customs charges.